http://www.RogueSystems.co.uk/images/roguesystemslogo.gifhttp://www.RogueSystems.co.uk/This is the last clutch you will even need for your MR2 Turbo! Carbon-carbon is the amazing material used by Top Fuel, Funny Car, Pro Stock and Formula One cars for brakes and clutches. CC will never over heat or glaze over. CC holds more power the hotter it gets and wears at a much lower rate than other materials which makes it ideal not only for drag racing, but also for road racing and hard street use as well. These are Twin Disc clutches with awesome holding power and ultra smooth engagement. All parts are CNC’ed from aerospace materials and the final assembly is dynamically balanced. These three units utilize highly modified factory pressure plates which helps keep the cost as low as possible. And RPS guarantees that all of the segmented wear surfaces are fully replaceable for the life of your car! - Price: £1,879.69 (£2,208.64 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=486This is the new entry level ECU from Link to replace the recently discontinued Apexi Power FC. However, unlike the PFC this ECU is packed to the hilt with features.

A list of these features include:

Precision 3D boost control that is superior to stand alone after-market electronic boost controllers with air and engine temperature compensation

USB on board for direct connection to your laptop

Absolute stability of tune regardless of altitude and daily changes thanks to the on-board, barometric sensor

Run your multi butterfly (NA or boosted) engine with confidence by selecting 4D fuel mapping

Keep your LEM firmware (the software the ECU runs) up to date with free downloads

Select the engine you want to using the factory triggering from the LEMG3's digital set-up menu Lots of spare "in & out" wires to give you the flexibility you need for fans, pumps, switches, lights etc.

Plug the DisplayLink straight in for instant results

Group or staged injection, you choose

Add a "pot" to give the driver the option of reducing boost or a switch to select another boost map

Switched dual mapping for different fuels Dual maps to optimise switched cams (VTEC)

4 MB data logging on board (to be enabled by firmware upgrade later)

Compatible with the excellent, cost effective, Innovate LC1 "wide-band" sensor and controller

Temp Based RPM and MAP Limiters to protect your engine

"Rocket fast" 40 MHz microprocessor for "rock solid" control up to 20,000 rpm

Huge fuel and ignition maps (if required) with 0.1 resolution that you can define

Control your nitrous or water injection in real time 3D tables

Motor-sport proven anti-lag, launch and flat shifting

Run up to 1.5 bar of boost (22 lbs). For an additional 10% on your purchase price the LEMG3 can run 4 bar! (55 psi) If specified at time of ordering.

We can also convert you engine from Dizzy to Wasted or Direct coil ignition.

- Price: £514.99 (£605.11 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=487This is an extremely nice body kit - you should buy one!!

The price is to be confirmed shortly, sorry for the delay - phone for more details... - Price: £999.99 (£1,174.99 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=488The rubber bush of the tension rod has been replaced with pillow balls (spherical bearing) in all TEIN's Pillow Ball Tension Rod to eliminate tow change through compliance on acceleration or deceleration and allow only for vertical movement by the lower - arms. It also reduces the roll at corners and creates quicker steering response. In addition, the wheel alignment (caster angle) can be set through adjustments. - Price: £238.29 (£279.99 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=489The rubber bush of the tension rod has been replaced with pillow balls (spherical bearing) in all TEIN's Pillow Ball Tension Rod to eliminate tow change through compliance on acceleration or deceleration and allow only for vertical movement by the lower - arms. It also reduces the roll at corners and creates quicker steering response. In addition, the wheel alignment (caster angle) can be set through adjustments. - Price: £208.50 (£244.99 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=490TEIN's pillow ball (spherical bearing) upper mount is designed for each individual model of the vehicle. By retaining the positioning design of upper spring and shock absorber close to manufacture's standards, TEIN's pillow ball upper mount keeps height change to the minimum and maintains the stroke center.

Mk2 Front : £127.65 per pair

MK2 Rear : £119.14 per pair

MRS Front : £148.93 per pair

MRS Rear : £136.16 per pair

- Price: £148.93 (£174.99 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=491Newly designed and developed for those core drivers seeking the ultimate in street and track performance.

• Mono-tube internal damper design

• Full-length ride height adjustment system

• 16-level damping force adjustment feature(combined comp./rebound adjustment)

• Newly developed M.S.V. (Micro Speed Valve)

• EDFC compatible for easy in-car damping force adjustment!!

- Price: £1,148.93 (£1,349.99 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=492Pressed steel cover, Single plate with sprung hub. (225mm disk. Release B/G set enclosed).

Comes complete with OSG flywheel. - Price: £560.00 (£658.00 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=493Pressed steel cover, Twin plate clutch, Pressure of cover 9800N-m (1000Kgf/m).

Comes complete with OSG Special release bearing and flywheel. - Price: £855.00 (£1,004.63 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=494This is a replacement braided brake line kit for the SW20 MR2. The kit comes ready assembled with chasis mounting brackets included.

The brake lines are available the following colours,

- Sexy Blue
- Clear/Silver
- Black
- Carbon

All brake lines are weather proof coated. - Price: £79.99 (£93.99 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=495